Hi everyone! I have been browsing the forums for a long time now while waiting for my WebDT366 to arrive but this is my first post...
I bought my WebDT366 from tbowland on the forums and it came with the Ambia logo on the top corner... It boots fine into the Ambia OS but I obviously can't do anything with that so I want to install Micro XP somehow.
I can get to the BIOS and set it to boot from USB Flash Drive. I used Novicorp Wintousb to make a bootable flashdrive version of MicroXP 0.82
It shows me the option of a text install or a GUI install and it starts Setup but both versions eventually crash and give an error:
SESSION3_INITIALIZATION_FAILED
0x0000006f (0xC0000034, 0x00000000, 0x00000000, 0x00000000)
Can anyone help me figure this out? Is it the way I made the USB boot drive or is it my version of Windows or something else altogether?
The other odd thing I noticed is that I have turned off every option other then USB FlashDrive... it shouldn't even try o boot from anything else but after I get this error, it boots ino the Ambia software.
MicroXP doesn't want to install
-
- Full Member
- Posts: 135
- Joined: Tue Nov 23, 2010 5:51 pm
- Location: Florida's Central Gulf Coast
Re: MicroXP doesn't want to install
I have had limited success with WINTOUSB on the WEBDT as well as other computers. Burn XP to a CD and install from a USB CD - you'll have no trouble.
Good luck, -Dave
Good luck, -Dave
Re: MicroXP doesn't want to install
Hmmm k... I don't have a USB CD Drive but I can try to borrow one.
Do I need to re-format the drive somehow before attempting a Windows install?
Do I need to re-format the drive somehow before attempting a Windows install?