webdt.org

Posted: **Tue Nov 17, 2009 1:13 am**

Hi,

Are these pinouts from the main internal ide-flash drive the same as in 2,5' laptop hdd ?
What i want to do is connecting internal flash drive to ordinary PC and upload OS this way.

Posted: **Wed Nov 25, 2009 2:17 pm**

The Primary Master HDD connector leading into the FlashROM board is a typical 2mm 44 pin IDE pinout, although the header is NOT typical. If you want to use it, it must be replaced on the board.

webdt.org

Question about Internal IDE flash drive connection pin outs

Question about Internal IDE flash drive connection pin outs

Re: Question about Internal IDE flash drive connection pin outs