Android...
-
- Full Member
- Posts: 171
- Joined: Tue Jun 09, 2009 10:30 pm
- Contact:
-
- Newbie
- Posts: 9
- Joined: Wed Jan 27, 2010 4:49 pm
Re: Android...
Hopefully will have something usable soon. Having more problems than I expected with the wireless networking at the moment....
If you read the other message you would have seen that I am basing the work on 1.6. Just read a seperate message from the android-x86 group that mentioned the eclair code has had the GUI performance improved.. so it may be possible to get a 2.1 version soon as well.
If you read the other message you would have seen that I am basing the work on 1.6. Just read a seperate message from the android-x86 group that mentioned the eclair code has had the GUI performance improved.. so it may be possible to get a 2.1 version soon as well.
Re: Android...
Just digging this back up.
I tried the live usb stick for android 1.6 on the webdt 366.
It loads fine, but touchscreen is not useable, so haven't been able to try the responsiveness, i also do not have a keyboard that i can hookup to this.
Just wondering if anybody has any pointers to how to get the touch to work or other tips?
Thanks,
Richard
I tried the live usb stick for android 1.6 on the webdt 366.
It loads fine, but touchscreen is not useable, so haven't been able to try the responsiveness, i also do not have a keyboard that i can hookup to this.
Just wondering if anybody has any pointers to how to get the touch to work or other tips?
Thanks,
Richard
-
- Administrator
- Posts: 569
- Joined: Tue Mar 24, 2009 9:11 pm
Re: Android...
Only thing to do is discover what kernel version and again xorg server version they are putting in to that version of android. From there try to find a driver at www.penmount.com for the pcm9000 serial board that lines up with the versions. In the past I have had success emailing their tech support group asking for a driver. They told me how to modify an existing one to work for my purposes. I have tried android 2.0 snapshots with no success. USB cd-rom hangs on boo no matter what kernel parameters I pass at the boot screen. May try again soon.
quotaholic
quotaholic
-
- Newbie
- Posts: 9
- Joined: Wed Jan 27, 2010 4:49 pm
Re: Android...
Hi,
Android does not use X so the penmount drivers are no good.
I got this working by using the serial driver that is part of the kernel. There was a couple of issues with this but it works.
The kernel needs to be built with the penmount module and this has to bound to a serial port. There is a utility called inputattach that does this.
When the kernel module is loaded and inputattach is run at startup this gives you a /dev/input device is available and android uses this. Calibration is picked up from the calibration done with the tslib stuff - but I don't think Android uses tslib itself (could be wrong here)
I also had to change the source of the kernel penmount driver slightly as it seemed to have a couple of parameters reversed. I am not sure if this is a bug with the driver or a bug with the way the penmount chip is wired up in webdt's.
With that all done it works under android and I have had it running quite well on the webdt.
Where I struggled (and why I have left it at the moment) is getting networking to work reliably. The only time I have got a network connection that worked properly is with my phone tethered to it. I could not get a pcmcia solution (wired or unwired) to work.
I think there is a problem with sound as well.
Regards
Darren
Android does not use X so the penmount drivers are no good.
I got this working by using the serial driver that is part of the kernel. There was a couple of issues with this but it works.
The kernel needs to be built with the penmount module and this has to bound to a serial port. There is a utility called inputattach that does this.
When the kernel module is loaded and inputattach is run at startup this gives you a /dev/input device is available and android uses this. Calibration is picked up from the calibration done with the tslib stuff - but I don't think Android uses tslib itself (could be wrong here)
I also had to change the source of the kernel penmount driver slightly as it seemed to have a couple of parameters reversed. I am not sure if this is a bug with the driver or a bug with the way the penmount chip is wired up in webdt's.
With that all done it works under android and I have had it running quite well on the webdt.
Where I struggled (and why I have left it at the moment) is getting networking to work reliably. The only time I have got a network connection that worked properly is with my phone tethered to it. I could not get a pcmcia solution (wired or unwired) to work.
I think there is a problem with sound as well.
Regards
Darren
Re: Android...
Darren,
Anything useable i can test, i have 2 of these things and i think you know what i want to run on them![Tongue :P](./images/smilies/tongue.gif)
Richard
Anything useable i can test, i have 2 of these things and i think you know what i want to run on them
![Tongue :P](./images/smilies/tongue.gif)
Richard
-
- Newbie
- Posts: 9
- Joined: Wed Jan 27, 2010 4:49 pm
Re: Android...
Richard,
What network card do they have in them? Will see if I can put a usable image together. No promises though...
Regards
Darren
What network card do they have in them? Will see if I can put a usable image together. No promises though...
Regards
Darren
Re: Android...
I would love to see this work I have a DT369 that has the 1G processer.
I really want android on this. I have XP running on it now.
Mark
I really want android on this. I have XP running on it now.
Mark
Re: Android...
Darren,darrenmason wrote: Richard,
What network card do they have in them? Will see if I can put a usable image together. No promises though...
Regards
Darren
I have the CISCO aironet 350 in mine "AIR-PCM350"
Have you tried any more on this?
Richard