BIOS DT368

Have a tip or tweak that worked for you? This is the place to share it. In particular allocatable memory, flash card slot limitations and speeds as well as how to set up a toggle for outdoor viewable video.
Post Reply
borlud
Newbie
Newbie
Posts: 3
Joined: Wed Jul 08, 2009 8:07 am

BIOS DT368

Post by borlud »

I have got the unit DT368 (Hard Disk 0:512Mb-Flash Memory; Hard Disk 1,2,3: None; 256Mb-RAM. BIOS (DTResearch DT368 BIOS ver.2.00.28) can be accessed through the key F2 and his settings are not changeable. It would be very kind of you, if you could tell me how I can set up BIOS for boot this unit from CD-ROM or USB �hard drive.
Thank you.
borlud
rectic
Jr. Member
Jr. Member
Posts: 71
Joined: Fri May 22, 2009 9:06 am

Re: BIOS DT368

Post by rectic »

I've got BIOS 2.00.28 on mine, it's PhoenixBIOS and I've got the ability to change things..
borlud
Newbie
Newbie
Posts: 3
Joined: Wed Jul 08, 2009 8:07 am

Re: BIOS DT368

Post by borlud »

Hi, rectic
Please, explain how J can set up BIOS for boot this unit from USB-Stick
Thank you
borlud
rectic
Jr. Member
Jr. Member
Posts: 71
Joined: Fri May 22, 2009 9:06 am

Re: BIOS DT368

Post by rectic »

I get into BIOS with CTRL F2.

There are tabs at the top and one says Boot. You can then use + or - to change the boot order.

That is at least how PhoenixBIOS works on this one. There may be other BIOS's out there for these units.
borlud
Newbie
Newbie
Posts: 3
Joined: Wed Jul 08, 2009 8:07 am

Re: BIOS DT368

Post by borlud »

Thanks. It has turned out. What from the opened lines concerns to USB-stick
Post Reply