If I knew how to build an installer I would however the dd tool is a raw transfer tool in linux and unix. They do make a windows version but not relevant here.
Grab the slax 6.1.1 iso and get that on a thumb drive and bootable by following the directions on the slax site for doing so.
Next get the lxde image on another thumbdrive.
Boot the dt to slax with a usb hub in place. As its going though its thing plug in the thumb drive with lxde on it.
Press escape at the login to get a terminal.
Login: root
pass: toor
Now for good measure partition your drive eliminating all partitions
opens a cli partition utlity
Erase all partitons make one new partition at maximum size. Toggle bootable on. Type 083 and write. Answer: yes.
quit
now type:
or
to see the paths to the drives that you have plugged in.
to transfer the image type:
Code: Select all
dd if=/path/to/image.img of=/dev/hda
path to image being the whole path to the image on the usb stick including the extention.
This will take about 15 minutes. Wait for the lights to stop blinking the terminal command may finish first.
Enjoy
quotaholic