ASK-IR, IRDA, FIR, WTF!

Specifications for the DT368 / Atigo T and discussion on hardware

ASK-IR, IRDA, FIR, WTF!

Postby howie368 » Fri Apr 16, 2010 10:15 am

I'm having problems with the IR port on my 368. Windows sees it as com port 2 or unknown device depending on the settings i use in the bios. I've used several different XP drivers, including the OEM ALI chipset FIR driver. Puppy and Nimblex didn't let me use the port either. Nothing I have tried has worked.

Any of you have a working Ir? I wouldn't mind having the correct bios settings or a link to the drivers. Any help would be appreciated.

I have confirmed that there is an Ir transceiver soldered onto the board.
howie368
Newbie
Newbie
 
Posts: 36
Joined: Wed Jan 27, 2010 12:52 am
Location: U.S.A.

Re: ASK-IR, IRDA, FIR, WTF!

Postby damwashere » Sat Apr 23, 2011 8:06 am

There is no IRDA hardware installed on my 368. Have you looked to see if the IR tranciever is actually installed on the board? The only WebDT I have seen IRDA hardware installed on is the DT375.

DAM
damwashere
Newbie
Newbie
 
Posts: 29
Joined: Sat Apr 23, 2011 6:49 am


Return to Specifications / Hardware

Who is online

Users browsing this forum: No registered users and 1 guest

cron

x