Successfully created an XPe image

This board is for Xybernaut Atigo T and DT368 owners. Topics that do not fit in other areas.

Successfully created an XPe image

Postby ralbright » Fri Dec 24, 2010 3:13 pm

Well ladies & germs, after over 3 weeks of near constant work, building and rebuilding XPe builds from scratch, I have finally created a build that works perfectly on the DT368. The total build uses only 293mb of the 512 flash drive. All of the features work including the touchscreen and button manager.

Now if there is enough interest, I will ghost this file up and put it online for people to download, maybe I should charge for it? (Well it is the christmas season and all so I guess I will give it away, for a while at least).

Have a very Merry Christmas
And remember that Christ is the Reason for the Season.
ralbright
Newbie
Newbie
 
Posts: 6
Joined: Sun Dec 12, 2010 11:47 pm

Re: Successfully created an XPe image

Postby ravivraz » Sat Dec 25, 2010 2:29 pm

if you could post a link for download it will be life saving for my dt.
i have my last image but the file broke.... norton ghost gets stuck!!!

thanks
ravivraz
Newbie
Newbie
 
Posts: 7
Joined: Sun Oct 10, 2010 2:34 am

Re: Successfully created an XPe image

Postby rkw » Tue Dec 28, 2010 8:55 am

same here,

that  would definately be appreciated!!
rkw
Newbie
Newbie
 
Posts: 4
Joined: Fri Dec 17, 2010 11:07 am

Re: Successfully created an XPe image

Postby f-radzio » Sat Mar 19, 2011 12:14 pm

i will be glad too, if you post a link

thnx
f-radzio
 

Re: Successfully created an XPe image

Postby kyufa » Mon Mar 21, 2011 5:06 pm

OMG Please post this image!! You'll be a hero to everyone with a sad DT368, and kindness on this scale won't go unrewarded...
kyufa
Newbie
Newbie
 
Posts: 2
Joined: Mon Jul 19, 2010 11:34 am

Re: Successfully created an XPe image

Postby ralbright » Mon Mar 28, 2011 9:56 pm

Okay wow, I guess I need to check these forums more often, I have been quite busy in school as of late. The image I have is not a traditional image, rather it is the files that are created by the Windows XPE Builder, it would still need to go through the first boot agent on the first boot. The easiest way I have found to load these is through the mini-windows XP bootable off of USB, found in Hiren's Boot CD. (IF you don't know how to do that, do a little more research, the information is out there). I have uploaded this to MegaUpload, here is the URL: http://www.megaupload.com/?d=SA00ACAY  Extra programs (i even included a really cool broken LCD background for your DT, it drives my wife nuts when she sees it, she keeps thinking she broke the screen) and drivers for the DT368 can be found here: http://www.megaupload.com/?d=53JUVHX6

Instructions for use (this assumes you have successfully loaded the files onto the DT368, and have completed the first boot agent)

On first boot, you will see the start menu, you will need to reactivate the various functions of the start menu (right click functionality, all programs, etc. which is accessible from the run menu, search on google how to disable right click from the registry to figure out how to turn it back on)

Reboot

Then setup the start menu with all the things you want by right-clicking the start menu button and changing the various properties.

Load the drivers that are in the second file.

Setup your DT368 exactly how you want, and enjoy!!

Questions, post them here, and I will try to get back to them sooner than I did last time. (sorry)
ralbright
Newbie
Newbie
 
Posts: 6
Joined: Sun Dec 12, 2010 11:47 pm

Re: Successfully created an XPe image

Postby f-radzio » Fri May 06, 2011 8:46 am

i have a problem.

I bay a new sdd drive. 4GB transcend and install step by step you image. On firs start Windows Logon i get this message

A problem is preventing Windows from accurately checking the license for this computer. Error code: 0x80070002

and logout me :(
f-radzio
 

Re: Successfully created an XPe image

Postby Dave7341 » Fri May 06, 2011 2:47 pm

Possible reason and possible fix here:

http://support.microsoft.com/kb/310794
Dave7341
Full Member
Full Member
 
Posts: 135
Joined: Tue Nov 23, 2010 5:51 pm
Location: Florida's Central Gulf Coast

Re: Successfully created an XPe image

Postby ralbright » Fri May 06, 2011 2:48 pm

f-radzio wrote:i have a problem.

I bay a new sdd drive. 4GB transcend and install step by step you image. On firs start Windows Logon i get this message

A problem is preventing Windows from accurately checking the license for this computer. Error code: 0x80070002

and logout me :(

Try doing the first boot without the SD card installed. Once you finish the 1st boot, then install the SD card. Let me know how that works.
ralbright
Newbie
Newbie
 
Posts: 6
Joined: Sun Dec 12, 2010 11:47 pm

Re: Successfully created an XPe image

Postby f-radzio » Sun May 08, 2011 1:59 pm

You mean CF card ?? Yes, I pull out CF card and PCMCIA wireless card. That not help, the same error appear.on screen. I read in some article, but nothing helps.

http://support.microsoft.com/kb/310794
http://digitalpbk.blogspot.com/2008/04/ ... nting.html

even i copy missing file error not go.
f-radzio
 

Re: Successfully created an XPe image

Postby f-radzio » Sun May 08, 2011 2:26 pm

i found this:
viewtopic.php?t=6

"To make the change, load your .slx in Target Designer.  Go to Settings | Target Device Settings | Boot Partition Size (MB).  Set it to 1024 and retry the build"

maybe the picture was made ??for the drive <1GB.  I don't have .slx file and Target Designer. Could someone do that ? Maybe that will help  :-\
f-radzio
 

Re: Successfully created an XPe image

Postby ralbright » Sun May 08, 2011 2:30 pm

Unfortunately the laptop that I used to create the XPe image went belly up a few months back, and for whatever reason the image designer software will not load onto my main computer.
ralbright
Newbie
Newbie
 
Posts: 6
Joined: Sun Dec 12, 2010 11:47 pm

Re: Successfully created an XPe image

Postby f-radzio » Sun May 08, 2011 3:16 pm

oh no. that is maybe the answer for this problem. try anything. don't give up.
f-radzio
 

Re: Successfully created an XPe image

Postby f-radzio » Tue May 10, 2011 12:56 pm

any one else can help ?
f-radzio
 

Re: Successfully created an XPe image

Postby xendin » Wed May 18, 2011 9:02 am

No slx file then try this:
The XPe image seems to be for a 500Mb drive.
Re-partition your drive to 500Mb and remember to set the flag as bootable.
Copy your image and re-boot.
You should now see the first boot agent.
xendin
Newbie
Newbie
 
Posts: 3
Joined: Wed Apr 21, 2010 8:05 am


Return to General Discussion

Who is online

Users browsing this forum: No registered users and 1 guest

cron

x