Got my hands on a DT220-S, Can't find anything! Help!

[ionbladez]

Hi guys, after selling my 366, it seems I've now acquired a DT220-S Thin client, and it didn't come with any adapters/wires/cables/pieces but the unit.

The seller was highly reputable and the feedback was immaculate. He said it was WORKING.

 Only problem is:
I tried to wire my own 12Volt adapter to it, tried both polarities - With fail.
I know these units have a voltage/reversing protector, so I decided to remove the case.

Oddly enough they do - But I removed the power cable.
Also out of bad luck, I forgot my camera, and two pdas in my buddy's truck as well.

All I would like to know is if anyone would have anything REMOTELY similar to a board sheet/instruction manual or something like that..

thanks.,

[matt]

Voltage isn't everything. What power/current rating did your 12V power supply have? You'll probably need at least 1 amp.

There's a product brief here: http://dtri.sg1002.myweb.hinet.net/pdf/webdt220.pdf, maybe the same website has some other info lurking within....

[ionbladez]

Well ya, it's 12Volts @ 3 amps rated.
Not sure if that's peak but I tried the power switch/led cable on all 4 possible configurations.
Also I took a multimeter to the pins on those, and didn't get anything.
Possibly my adapter's end - I cut an old laptop charger for it.

But thanks for the instructions, I don't have adobe or any pdf reader on here yet, but I'll take a look.

[puh]

dear sir
what is the processor of this unit
best regards

[plane_crazy]

If you read the above pdf document it says there is a Geode processor in there. It does not say what speed however.

Bruce

[quotaholic]

Any FCC id number on the unit will provide a way to research the unit further in hardware specs and capabilities.

[puh]

dear ionbladez,
please for 1 picture inside this great thin client
thank you in advance!